Specifications

5-111

Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches

Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005

Chapter 5 AXSM Command Reference

cnfcdmode

Configure Card Mode—AXSM-E, AXSM-32-T1E1-E

Specifies the type of the lines in use on the back card.

Note Use cnfcdmode only when the card is not provisioned.

Syntax

cnfcdmode <mode>

Syntax Description

Related Commands

dspcd, dspcds

Attributes

Example

MGX8850.11.AXSME.a > cnfcdmode 1

MGX8850.11.AXSME.a >

mode The type of lines used on the back card.

• 1 = T1

• 2 = E1

• 3 = T3 (PXM-1E only)

• 4 = E3 (PXM-1E only)

Log: yes State: active, standby Privilege: GROUP1