Specifications

5-104
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
cnfatmlayer
cnfatmlayer
Configure ATM Layer—AXSM-XG
Configures the ATM cell layer parameters on the specified path (path_num).
Note The NullCellHdr and NullCellPayload of the ATM cell layer are not configurable due to hardware
limitations.
Syntax
cnfatmlayer <path_num> -sps <PayloadScramble>
Syntax Description
Related Commands
dspatmlayercnt
Attributes
Example
MGX8950.3.AXSMXG.a > cnfatmlayer 1.1.1 1
path_num Identifies the path whose ATM cell layer parameters you want to configure.
Note If you do not know the path_num, enter the dsppaths command to
see a list of all path numbers on the current card.
-sps Enables or disables payload scramble.
1–enable
2–disable
Log: no State: active Privilege: GROUP1