Specifications

5-102
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
cnfatlaslndiagstat
cnfatlaslndiagstat
Configure Atlas Line Diagnostics Statistics—AXSM
Configure Atlas line diagnostics statistics according to the designated arguments. Enter a number to
indicate the arguments as follows:
• 1—Non-compliant CLP=0 cells
• 2.—Non-compliant CLP=0+1 cells
• 3—Discarded CLP=0 cells
• 4—Discarded CLP=0+1 cells
Syntax
cnfatlaslndiagstat <bay> <line> <arg1> <arg2> <arg3>
Syntax Description
Related Commands
cnfatlaslndiagstat, dspatlasdiagcnfcstat, dspatlasdiagcstat, dspatlasdiagstatcnf, dspatlaslndiagstat
Attributes
Example
Configure Atlas line diagnostics statistics for line 1 on the current back card in the top bay according to
arguments 1, 2, and 3.
M8850_LA.1.AXSM.a > cnfatlaslndiagstat 1 1 1 2 3
M8850_LA.1.AXSM.a >
bay.line Identifies the bay (1 or 2) in which the back card is installed.
line Identifies the line number. The line number is from 1 to the highest
numbered line on the back card.
arg1 Enter a number that indicates the argument you want to use to configure the
Atlas line diagnostics statistics, in the range from 1 through 4.
arg2 Enter a number that indicates the argument you want to use to configure the
Atlas line diagnostics statistics, in the range from 1 through 4.
arg3 Enter a number that indicates the argument you want to use to configure the
Atlas line diagnostics statistics, in the range from 1 through 4.
Log: yes State: active Privilege: SERVICE_GP