Specifications

5-101
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
cnfapsln
Related Commands
addapsln, delapsln, dspapsln, dspapslns, switchapsln, dspapsbkplane, dspbecnt
Attributes
Example
MGX8850.1.9.AXSME.a > cnfapsln -w 1.1.1 -sf 3 -sd 5 -wtr 5 -dr 2 -rv 1
-wtr The number of minutes to wait after the working line has become functional
again, before switching back to the working line from the protection line.
• On AXSM/A and AXSM/B the range is 5–12.
• On AXSM-E and AXSM-XG, the range is 1–12.
Example: -wtr 5
-dr Specifies the direction: 1: unidirectional, 2: bidirectional
Example: -dr 2
Bidirectional means that both the receiving and transmitting paths are
switched. Unidirectional means that only the affected path, receiving or
transmitting, is switched.
-rv Enables revertive behavior. 1: non-revertive, 2: revertive
Example: -rv 1
-proto On the AXSM-E and AXSM-XG, you can specify either Telecordia or ITU
protocol by following the -proto keyword with either a 1 or a 2.
1: Telecordia
2: ITU
Log: yes State: active Privilege: SUPER_GP