Specifications

5-99
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
cnfalm
Related Commands
dspalmcnf
Attributes
Example
Configure the following thresholds for triggering a major line-level alarm on line 2 in bay 1:
• The line type is SONET line.
• The bay is 1, and the line number is 2.
• The severity of the triggered alarm is major.
• The errored seconds for a 15-minutes period and a 24-hour period are 60 and 600, respectively.
• The severely errored seconds for a 15-minutes period and a 24-hour period are 3 and 7, respectively.
• The code violations for a 15-minutes period and a 24-hour period are 75 and 750, respectively.
• The unavailable seconds for a 15-minutes period and a 24-hour period are 10 and 10, respectively
node4.1.AXSM.a > cnfalm -sonetline 1.2 -lnsev 2 -lnes15 60 -lnes24 600 -lnses15 3 -lnses24
7 -lncv15 75 -lncv24 750 -lnuas15 10 -lnuas24 10
Check the configuration by executing dspalmcnf for the line number and line type in this example.
MGX8850.1.AXSM.a > dspalmcnf -sonetline 1.2
LineNum: 1.2
Line Stat Alarm Severity: No Alarm
15min Threshold 24hr Threshold
Line ESs : 60 600
Line SESs: 3 7
Line CVs : 75 750
Line UASs: 10 10
-bses15 SES15min Bipolar violation severely errored seconds during a 15-minute period.
-bses24 SES24Hr Bipolar violation severely errored seconds during a 24-hour period.
-psefs15 SEFS15min PLCP severely errored frame seconds during a 15-minute period.
-psefs24 SEFS24Hr PLCP severely errored frame seconds during a 24-hour period.
-puas15 UAS15min PLCP unavailable seconds during a 15-minute period.
-puas24 UAS24Hr PLCP unavailable seconds during a 24-hour period.
Log: yes State: active Privilege: GROUP1