Specifications

5-85
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
clrportdbgcnt
clrportdbgcnt
Clear Port Debug Counters—AXSM
Clear all port debugging counters on the current AXSM. The system does not return a message unless a
syntax error occurs (such as an extra character following the command on the CLI).
Note To enable the port debugging feature, enter the cnfportdbg <ifNum> 1 command. Replace <ifNum> with
the number of the port on which you want to enable the debugging feature.
Syntax
clrportdbgcnt <ifNum>
Syntax Description
Related Commands
cnfportdbg, dspportdbgcnt
Attributes
Example
Display the counters for logical interface (or port) 11, then clear all the port debugging counters on the
current AXSM. Again, display the counters for logical interface 11.
M8850_NY.1.AXSM.a > dspportdbgcnt 11
Ingress Egress
Arrival cells cnt[1]: 0 51
Threshold dscd cnt[1]: 0 0
Programmed dscd cnt[1]: 0 0
Departure cells cnt[1]: 0 47
Arrival cells cnt[2]: 0 0
Threshold dscd cnt[2]: 0 0
Programmed dscd cnt[2]: 0 0
Departure cells cnt[2]: 0 0
Arrival cells cnt[3]: 0 0
Threshold dscd cnt[3]: 0 0
Programmed dscd cnt[3]: 0 0
Departure cells cnt[3]: 0 0
Arrival cells cnt[4]: 0 0
Threshold dscd cnt[4]: 0 0
Programmed dscd cnt[4]: 0 0
Departure cells cnt[4]: 0 0
Arrival cells cnt[5]: 0 0
ifNum Logical interface (or port) number. The range is from 0 through 60.
Log: yes State: active Privilege: SERVICE_GP