Specifications

5-79
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
clrlntrace
clrlntrace
Clear Line Trace—AXSM, AXSM-E, AXSM-32-T1E1-E
Clears the trail trace bytes that were transmitted using cnfln -txtrace on the specified E3 line (bay.line)
and sets them to the default NULL value. Use dspln to see if the trail trace bytes are cleared.
Syntax
clrlntrace bay.line
Syntax Description
Related Commands
cnf.n, dspln
Attributes
Example
This example shows how to transmit and display and then clear and display trail trace bytes.
MGX8850.12.AXSME.a > cnfln -e3 1.1 -txtrace 123456789123450
Cupertino.12.AXSME.a > dspln -e3 1.1
Line Number : 1.1
Admin Status : Up Alarm Status :
Critical
Line Type : e3g832adm Number of ports : 0
Line Coding : e3HDB3 Number of partitions: 0
Line Length(meters) : 0 Number of SPVC : 0
Loopback : NoLoop Number of SPVP : 0
Xmt. Clock source : localTiming Number of SVC : 0
Xmt. Trace : 123456789123450
MGX8850.12.AXSME.a > clrlntrace 1.1
MGX8850.12.AXSME.a > dspln -e3 1.1
Line Number : 1.1
Admin Status : Up Alarm Status :
Critical
Line Type : e3g832adm Number of ports : 0
Line Coding : e3HDB3 Number of partitions: 0
Line Length(meters) : 0 Number of SPVC : 0
Loopback : NoLoop Number of SPVP : 0
Xmt. Clock source : localTiming Number of SVC : 0
Xmt. Trace :
bay.line Identifies the bay (1 or 2) and the line number. The range for line can be 1 to the
highest numbered line on the back card.
Log: yes State: active Privilege: GROUP1