Specifications

5-62
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
clrchandbg
clrchandbg
Clear Channelized Debugging —AXSM
Clears channelized debugging for the specified channel on the current AXSM.
Note To enable the channelized debugging feature, enter the cnfchandbg command.
Syntax
clrchandbg <ifNum> <vpi> <vci>
Syntax Description
Related Commands
cnfchandbg, dspchandbgcnf, dspchandbgcnt
Attributes
Example
Clear channelized debugging on logical interface (or port) 11, vpi 0, vci 0. Enter the dspchandbgcnt
command to verify that the channels have been cleared.
M8850_NY.1.AXSM.a > clrchandbg 11 0 0
M8850_NY.1.AXSM.a > dspchandbgcnt 11 0 0
Ingress Egress
Instantaneous Qdepth: 0 0
Arr CLP0 EFCI0 cells: 11 11
Arr CLP0 EFCI1 cells: 0 0
Arr CLP1 EFCI0 cells: 0 0
Arr CLP1 EFCI1 cells: 0 0
Dep CLP0 EFCI0 cells: 11 11
Dep CLP0 EFCI1 cells: 0 0
Dep CLP1 EFCI0 cells: 0 0
Dep CLP1 EFCI1 cells: 0 0
Detailed stats not enabled
ifNum Logical interface (or port) number. The range is from 0 through 60.
vpi Virtual path identifier in the range 0–255 (UNI) or 0–4095 (NNI or VNNI).
vci Virtual connection identifier (VCI):
• For a VCC on a UNI, the range is 1–4095. On an NNI or VNNI, the VCI range is
1–65535. For MPLS, the recommended minimum VCI is 35.
• For a VPC, the vci is 0.
Log: no State: active/standby Privilege: SERVICE_GP