Specifications

5-52
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
clidbxlevel
clidbxlevel
Command Line Interface Level—AXSM
The clidbxlevel command level one (1) causes the attributes of a command to be displayed when you
use the help (?) command. The displayed attributes are log, state, and privilege. You must re-execute
this command for it to take effect when you change to a new card.
The help (?) command output display, when clidbxlevel one (1) is in effect, is described in Table 5-14.
.
Syntax
clidbxlevel [level]
Syntax Description
Related Commands
None
Attributes
Example
In this example, the clidbxlevel is set to one (1) and the help (?) command is used on the wildcard string
“user”. All commands that contain the string “user” are display with their attributes.
MGX8850.7.AXSM.a > clidbxlevel 1
Value of cliDbxLevel is now 1
MGX8850.7.AXSM.a > ? user
Command Access Card Log
---------------------------------------------------
adduser GROUP1 A +
Table 5-14 clidbxlevel 1 help Output Display Descriptions
Headings Command Access Card Log
Example adduser GROUP1 A +
Description The name of the
command.
The user privilege
level required to
execute the
command.
The state of the card
required to execute
the command:
a–active
s–standby
i–initialized
Whether the
command is logged
or not:
+ yes
– no
level The level can be 0–3. If you do not include a level, the system displays the current level.
Level one (1) causes the command attributes to be displayed when you use the help
command.
Log: no State: active, standby, init Privilege: SERVICE_GP