Specifications

5-43
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
addport
Related Commands
cnfport, delport, dspport, dspports, dspportsct
Attributes
Example
With port-level SCT 4 confirmed on the disk, create logical port 3 on line 3 of bay 1. The minimum and
maximum cells per second must be the same—96000 cps in this example. The port SCT file ID is 4. The
interface type is NNI—specified by the 2 at the end of the command input. Confirm the result.
MGX8850.6.AXSM.a > addport 3 1.3 96000 96000 4 2
MGX8850.6.AXSM.a > dspport 3
Interface Number : 3
Line Number : 1.3
ifType Specifies the port as one of the following types of interfaces:
• 1 = UNI (User-to-Network Interface)
• 2 = NNI (Network-to-Network Interface)
• 3 = VNNI (Virtual Network-to-Network Interface)
• 4 = VUNI (Virtual User-to-Network Interface)
• 5 = EVUNI (Enhanced Virtual User-to-Network Interface)
• 6 = EVNNI (Enhanced Virtual Network-to-Network Interface)
EVNNI and EVUNI allow you to specify a range of VPIs for a single interface,
and this range of VPIs represents the virtual NNI or virtual UNI trunk. VNNI and
VUNI allow you to specify only one VPI for a single interface, and that VPI
represents the virtual NNI or virtual UNI trunk. Multiple VNNIs and EVNNIs
can coexist on the same line.
-vpi Virtual Path Identifier:
• UNI, Range = 1–4095
• NNI, Range = 1–4095
• VNNI, Range = 1–4095
• VUNI, Range = 1–255
• EVUNI, Range = 0–255
• EVNNI, Range = 0–4095
-minvpi The minimum VPI:
• 0 and 255 for EVUNI
• 0 and 4095 for EVNNI
-maxvpi The maximum VPI:
• 0 and 255 for EVUNI
• 0 and 4095 for EVNNI
Log: yes State: active Privilege: GROUP1