Specifications

5-42
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
addport
Syntax Description
ifNum A logical port (interface) number. Only one logical port is allowed if the line
operates as a UNI or NNI. For a virtual network to network interface (VNNI or
EVNNI), multiple ports can exist on a line. The ranges are:
• AXSM: 1–60.
• AXSM-E: 1–32.
• AXSM-XG: 1–126
path_num
(AXSM-XG only)
Identifies the channelized path to which you want to add a port.
Note If you do not know the path_num, enter the dsppaths command to see a
list of all path numbers on the current card.
bay.line Identifies the bay (1 or 2) and the line number. The line number is from 1 to the
highest numbered line on the back card.
guaranteedRate Guaranteed rate on a port in cells per second. For all interface types (UNI, NNI,
VNNI, EVNNI, and EVUNI), guaranteedRate must be the same as maxrate. The
total guaranteed rates cannot exceed the highest value in the following ranges:
• OC48 = 50–5651320 cps
• OC12 = 50–1412830 cps
• OC3 = 50–353207 cps
• T3 = 50–96000 cps for PLCP or 104268 cps for ADM
• E3 = 50–80000 cps
• T1 = 50–3622
• E1 = 50–4528
maxRate Maximum rate on a logical port in cells/second. For all interface types (UNI,
NNI, VNNI, EVNNI, and EVUNI), guaranteedRate must be the same as
maxrate. The total maximum rates cannot exceed the highest value in the
following ranges:
• OC48 = 50–5651320 cps
• OC12 = 50–1412830 cps
• OC3 = 50–353207 cps
• T3 = 50–96000 cps for PLCP or 104268 cps for ADM
• E3 = 50–80000 cps
• T1 = 50–3622
• E1 = 50–4528
sctID The ID of a service class template (SCT) for the port. The range is 0–255. The
SCT file must exist on the PXM45 disk. See cnfcdsct.
Note Currently, the system does not support certain parameters in the service
class templates (SCTs). These parameters are (when applicable) PCR,
SCR, and ICR. You can specify them through addcon, cnfcon, or Cisco
WAN Manager.