Specifications

5-34
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
addlnloop
Syntax (AXSM-E, AXSM-XG)
addlnloop < -ds3 | -e3 | -sonet | -e1 <bay.line> <-lpb loopback type>
Syntax Description (AXSM-E, AXSM-XG)
Syntax (AXSM-32-T1E1-E)
addlnloop -ds3<bay.line> -lpb <loopback type>
Syntax Description (AXSM-32-T1E1-E)
Attributes (AXSM-32-T1E1-E)
Attributes (AXSM, AXSM-E, AXSM-XG)
Related Commands
dellnloop
-ds3
-e3
-sonet
-e1
Specifies a DS3, E3, T3 , SONET (OC-3c, OC-12c, OC-48c), or E1 line.
bay.line Identifies the bay (1 or 2) and the line number. The line number is 1 to the highest
numbered line on the back card.
-lpb Specifies the loopback type for the line type. The entry for no loopback (1) removes
any existing loopback.
1 = No loopback
2 = Local loopback
3 = Remote loopback
-ds3 The ds3 bay number (1–2) and line number (1–16). For example, for bay 1, line 16,
enter:
-ds3 1.16
-lpb Specifies the type of loopback:
1 = NoLoop
2 = Local
3 = Remote
Log: yes State: active, standby, init Privilege: GROUP1
Log: yes State: active Privilege: GROUP1