Specifications

5-31
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
addlmi
addlmi
Add Local Management Interface—AXSM, AXSM-XG
The addlmi command allows you add extended LMI (XLMI) so that an AXSM logical interface can
support one of the following items:
• A feeder (Cisco MGX 8850 PXM1-based switch)
• A Service Expansion Shelf (SES)
Note By using the addlmi command to add LMI for a feeder shelf, the addfdr command is unnecessary.
Usage Guidelines
Note the following properties and behaviors before you use the addlmi command:
• For the feeder application of the addlmi command, the effect is the same as using addfdr, so you
do not need to use addfdr for a logical port in addition to addlmi.
• No other ILMI or LMI configuration can exist on the AXSM logical interface.
• No connections can exist on the AXSM logical interface.
• A combined maximum of 16 feeder lines or SES interoperability ports can exist on the switch.
• When a port is configured for an XMLI link with an SES, IP connectivity must be disabled.
• The XLMI timers are not configurable on the AXSM. Timer configuration is done on the SES. The
values for the LMI timers on AXSM are:
– SPVC Status Enquiry Timer: 10 seconds
– SPVC Update Status Timer: 10 seconds
– Retry Timers: 5 seconds
Syntax
addlmi <ifNum> <type>
Syntax Description
Related Command
dellmi, uplmi, dnlmi, uplmi, clrlmistat, dsplmi, dsplmis, dsplmistat
ifNum The logical interface number. Range: 1–60.
type The LMI type refers to either feeder support or interoperability with a BPX 8600-type
switch.
1–feeder
2–XLMI to support interoperability with SES