Specifications

5-29
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
addimaport
Related Commands
dspport, dspports, delport, cnfport
Attributes
maxRate The maximum bandwidth rate in cells per second.
Range for T1:
between 50 and N * (3622 * (M-1)/M * 2048/2049)
Range for E1:
between 50 and N * (4528 * (M-1)/M * 2048/2049)
N = the number of IMA links in the IMA group
M = the IMA group frame length
sctID The ID number of the port SCT file on the PXM disk. Range: 0–255.
For IMA, use SCT 54 (policing) or SCT 55 (non-policing). See the “Setting the
Correct Port SCT” section in the addimaport main description.
ifType Specifies the port as one of the following types of interfaces:
1 = UNI (User-to-Network Interface)
2 = NNI (Network-to-Network Interface)
3 = VNNI (Virtual Network-to-Network Interface)
4 = VUNI (Virtual User-to-Network Interface)
5 = EVUNI (Enhanced Virtual User-to-Network Interface)
6 = EVNNI (Enhanced Virtual Network-to-Network Interface)
EVNNI and EVUNI allow you to specify a range of VPIs for a single interface,
and this range of VPIs represents the virtual NNI or virtual UNI trunk. VNNI and
VUNI allow you to specify only one VPI for a single interface, and that VPI
represents the virtual NNI or virtual UNI trunk. Multiple VNNIs and EVNNIs
can coexist on the same line.
-vpi <vpi> The Virtual Path Identifier (VPI), which is used in this case to configure the
interface as a virtual trunk. Ranges:
1–255 VUNI
1– 4095 VNNI
-minvpi <minvpi> The minimum VPI. Ranges:
• 0–255 EVUNI
• 0–4095 for EVNNI
-maxvpi <maxvpi> The maximum VPI. Ranges:
• 0–255 EVUNI
• 0–4095 for EVNNI
Log: yes State: active Privilege: GROUP1