Specifications

xxiii
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Documentation
Documentation Notes for these Product Releases
This release includes new hardware or features for the following releases:
• Cisco MGX Release 5.2 introduces the Cisco MGX 8850/B multiservice switch
• Cisco MGX Release 5.2, for these multiservice switches:
– Cisco MGX 8850 (PXM1E)
– Cisco MGX 8850 (PXM45)
– Cisco MGX 8950
– Cisco MGX 8830
• Cisco MGX Release 1.3, for these multiservice switches:
– Cisco MGX 8850 (PXM1)
– Cisco MGX 8230
– Cisco MGX 8250
• Cisco MGX Release 5.2, for the Route Processor Modules (RPM-XF and RPM-PR)
• Cisco WAN Manager Release 15.1. CWM Release 15 introduced a helpful new documentation
feature: web-based online help. To invoke online help, press F1 on a PC, press the Help key on a
UNIX workstation, or select Help from the main or popup menu. Cisco WAN Manager online help
has been updated for Release 15.1.
Other components of multiservice WAN products, such as the Service Expansion Shelf (SES) and WAN
switching software have no new features for this release.
Related Documentation
This section describes the technical manuals and release notes that support this release of Cisco
Multiservice Switch products.
Technical Manual Order of Use
Use the technical manuals listed here in the following order:
Step 1 Refer to the documents that ship with your product. Observe all safety precautions.
• Regulatory Compliance and Safety Information for Cisco Multiservice Switch Products (MGX, BPX,
and SES)—This document familiarizes you with safety precautions for your product.
• Finding Cisco User Documentation Online—This document explains how to find documentation for
MGX, BPX, and SES multiservice switches and media gateways as well as CWM network
management software. These documents are available only online.
• Installation Warning Card—This document provides precautions about installing your cards. It
explains such subjects as removing the shipping tab and inserting cards properly into the correct
slots.
Step 2 Refer to the release notes for your product.
Step 3 If your network uses the CWM network management system, upgrade CWM. (If you are going to install
CWM for the first time, do so after Step 4.) Upgrade instructions are included in the following
documents: