Specifications

5-17
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
addcon
-casttype The broadcast type is either point-to-point or point-to-multipoint, as follows:
• 0 = point-to-point (P2P). This is the default.
• 1 = point-to-multipoint. P2MP connections are single-ended, so you add only the
master endpoint. Thereafter, you can add parties through the addparty
command.
-slave The slave-end connection identifier is an item you enter at the master end, in the
following format: nsap_address.vpi.vci
For a dual-ended connection, you get the slave-end connection ID at the slave-end
node when you add that endpoint. This keyword is mandatory when you are adding a
master endpoint (mastership=1)
.
-lpcr Local peak cell rate (PCR). Specifies the PCR from a local endpoint to a remote
endpoint. PCR is the maximum cell rate for the connection at any time. Possible
values are based on the connection, as follows:
• OC192 = 7–22605280 cells per second
• OC48 = 7–5651320 cells per second
• OC12 = 7–1412830 cells per second
• OC3 = 7–353207 cells per second
• T3 = 7–96000(PLCP), 104268(ADM) cells per second
• E3 = 7–80000 cells per second
• T1 = 7–3622 cells per second
• E1 = 7–4528 cells per second
-rpcr Remote PCR. Specifies the PCR from a remote endpoint to a local endpoint. PCR is
the maximum cell rate for the connection at any time. See values in -lpcr definition.
-lscr Local sustained cell rate (SCR). Specifies the SCR from a local endpoint to a remote
endpoint . SCR is the maximum cell rate that a connection can sustain for long
periods. Possible values are based on the connection, as follows:
• OC192 = 7–22605280 cells per second
• OC48 = 7–5651320 cells per second
• OC12 = 7–1412830 cells per second
• OC3 = 7–353207 cells per second
• T3 = 7–96000(PLCP),104268(ADM) cells per second
• E3 = 7–80000 cells per second
• T1 = 7–3622 cells per second
• E1 = 7–4528 cells per second
-rscr Remote SCR. Specifies the SCR from a remote endpoint to a local endpoint. SCR is
the maximum cell rate that a connection can sustain for long periods. See values in
-lscr definition.
-lmbs Local maximum burst size (MBS). Specifies the MBS from a local endpoint to a
remote endpoint (1–5000000 cells). MBS is the maximum number of cells that can
burst at the PCR and still be compliant.
-rmbs Remote MBS. Specifies the MBS from a remote endpoint to a local endpoint
(1–5000000 cells). MBS is the maximum number of cells that can burst at the PCR
and still be compliant.