Specifications

5-7
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
addchanloop
Syntax Description
Related Commands
delchanloop, dspchanloop
Attributes
Example
Add a loopback on the connection with VPI/VCI of 1 50 on logical port 4. No message is returned unless
an error occurs in command execution (such as an attempt to add a channel loopback to a connection that
already has a loopback).
MGX8850.1.AXSM.a > addchanloop 4 1 50
Check for the presence of the loopback by displaying all channel loopbacks on port 4.
MGX8850.1.AXSM.a > dspchanloop 4
Port Type lVPI lVCI rVPI rVCI
4 igrLpbk 1 50 0 35
ifNum The logical port number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
vpi The VPI of the connection. The range is 0–4095.
vci The VCI of the connection. The range is 1–65535.
loopback
mode
The direction of the loopback.
• 1 = ingress direction
• 2 = egress direction
Log: yes State: active, standby Privilege: SERVICE_GP