Specifications

5-5
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
addapsln
Related Commands
cnfapsln, delapsln, dspapsln, dspapslns, switchapsln, dspapsbkplane, clrbecnt, dspbecnt
Attributes
Example
Add 1+1 APS redundancy to two lines on the same AXSM card:
MGX8850.9.AXSM.a > addapsln 9.2.1 9.2.2 1
-p <protectionIndex> Slot number, bay number, and line number of the protection line in the format:
slot.bay.line
-am <archmode> The APS architecture mode to be used on the working/protection line pairs.
• 1 = 1+1; Provides line redundancy with traffic on both lines
• 2 = 1:1; Provides line redundancy with traffic on the active line only.
• 3 = annexB 1+1
• 4 = ycable 1+1 Annex B
• 5 = straight cable 1+1
Log: yes State: active Privilege: GROUP1