Specifications

4-35
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 4 AXSM Card Management
Managing Ports
Table 4-11 describes the parameters for the cnfport command.
Table 4-11 Parameters for the cnfport Command
Parameter Description
<ifNum> Logical interface (port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
-min Guaranteed rate on a port in cells per second. For all interface types (UNI, NNI,
VNNI, EVNNI, and EVUNI), guaranteedRate must be the same as maxrate.
The total guaranteed rates cannot exceed the highest value in the following
ranges:
• OC3—50 through 353207 cps
• STS1—50 through 114113 cps
• DS3—between 50 and 96000(PLCP) or 104268(ADM)
• E3—50 and 80000
• E1—between 50 and 4528 cps
• DS 1—between 50 and 3622 cps
• T1 based IMA group—multiple of 50 not greater than N * (3622 *
(M-1)/M * 2048/2049)
• E1 based IMA group— multiple of 50 not greater than N * (4528 *
(M-1)/M * 2048/2049), where N = number of IMA links in the IMA group,
and M = IMA group frame length
Note The bandwidth rate must always be multiple of 50, or equal to the
maximum physical line or path rate.
Note On the AXSM card, the guaranteed rate and max rate settings must be
the same.