Specifications

4-31
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 4 AXSM Card Management
Managing Lines
Managing Lines
Chapter 2, “Preparing AXSM Lines for Communication,”describes how to bring up (add) and modify
AXSM card lines. The following sections provide procedures for doing the following:
• Displaying a List of Lines
• Displaying the Configuration for a Single Line
• Bringing Down a Line
Displaying a List of Lines
To display a list of lines on an AXSM card, enter the dsplns command as follows:
M8850_LA.3.AXSM.a > dsplns
Line Line Line Line Length OOF AIS Alarm
Num State Type Lpbk (meters) Criteria cBitsCheck State
---- ------- ----------- ----------- ------ -------- ---------- -----
1.1 Up ds3cbitadm NoLoop 0 3Of8Bits Check Clear
1.2 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
1.3 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
1.4 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
1.5 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
1.6 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
1.7 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
1.8 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
2.1 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
2.2 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
2.3 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
2.4 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
2.5 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
2.6 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
2.7 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
2.8 Down ds3cbitadm NoLoop 0 3Of8Bits Check Clear
M8850_LA.3.AXSM.a >
Note The line number is found in the Line column in the format bay.line.
Table 4-10 SCT General Parameter Descriptions
Parameter Range Description
SERV-TYPE The service type (for example, CBR, VBR, ABR) to which the
parameters in this table apply (for example, COSB_NUM, CAC_TYPE,
UPC_ENB).
CI-CNTRL Enabled
Disabled
Indicates whether Congestion Indication Control is enabled or disabled.
VSVD Enabled
Disabled
Indicates whether the EFCI Threshold is enabled or disabled.