Specifications

4-28
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 4 AXSM Card Management
Managing Port SCTs
EFCI
or
EFCI (cells)
0–1000000 Explicit Forward Congestion Indication. The
threshold level for congestion indication for
ABR traffic using CI control. This threshold
is a percentage of the MAX_CELL THRESH
for the connection. 1000000 is equal to
100%.
Note On the AXSM/A and AXSM/B cards,
this parameter is called “EFCI.” On
the AXSM-XG and AXSM-E cards,
this parameter is called “EFCI
(cells).”
CLP_HI
or
CLPhi (cells)
0–1000000 Cells Loss Priority High. The maximum
number of cells that can be queued in the
buffer. CLP (1) cells that exceed this
threshold are discarded. This threshold is a
percentage of the MAX_CELL THRESH for
the connection. 1000000 is equal to 100%.
Note On the AXSM/A and AXSM/B cards,
this parameter is called “CLP_HI.”
On the AXSM-XG and AXSM-E
cards, this parameter is called
“CLPhi (cells).”
EPD0
or
EPD0 (cells)
0–1000000 Early Packet Discard 0. The maximum
number of cells that can be queued in the
buffer in packet mode. Any CLP (0+1) cells
that exceed this threshold, will be discarded.
This threshold is a percentage of the
MAX_CELL THRESH for the connection.
1000000 is equal to 100%.
Note On the AXSM/A and AXSM/B cards,
this parameter is called “EPD0.” On
the AXSM-XG and AXSM-E cards,
this parameter is called “EPD0
(cells).”
CLP_LO/EPD1
or
CLPlo/EPD1 (cells)
0–1000000 Cell Loss Priority Low/ Early Packet
Discard 1. The threshold at which CLP (0+1)
cells that exceed this threshold are discarded.
This threshold is a percentage of the
MAX_CELL THRESH for the connection.
1000000 is equal to 100%.
Note On the AXSM/A and AXSM/B cards,
this parameter is called
“CLP_LO/EPD1.” On the
AXSM-XG and AXSM-E cards, this
parameter is called “CLPlo/EPD1
(cells).”
Table 4-9 SCT COSB Threshold Parameter Descriptions (continued)
Label Range and Units Description