Specifications

4-19
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 4 AXSM Card Management
Managing Port SCTs
1 ERS = Explicit Rate Stamping
Port SCT Virtual Circuit Threshold Parameters (vcThr)
The dspportsct vcThr command output varies slightly according to type of AXSM card you are working
on.
The following report appears when you enter the dspportsct vcThr command on an AXSM/A or
AXSM/B card:
M8850_SF.5.AXSM.a > dspportsct vcThr 1
+------------------------------------+
| MINOR - VERSION | MAJOR - VERSION |
| 000000000000000 | 000000000000000 |
+------------------------------------+
+-----------------------------------------------------------------------------------+
Service Class Template [0] : VC Threshold Parameters
+-----------------------------------------------------------------------------------+
| SERV-TYPE | MAX_CELL | EFCI | CLP_HI | EPD0 | CLP_LO | SCALING | SCALING |
| | THRESH | | | | EPD1 | COSB | Log-If |
+-----------------------------------------------------------------------------------+
+-----------------------------------------------------------------------------------+
M8850_SF.5.AXSM.a >
The following report appears when you enter the dspportsct vcThr command on an AXSM-E card:
M8850_LA.4.AXSME.a > dspportsct vcThr 15
Service Class Template [ 0] : VC Threshold Parameters
Major Version [ 1] : Minor Version [ 0]
+----------------------------------------------------------+
| SERV TYPE(DEC) | MAX_CELL | EFCI | CLPlo/EPD| CLPhi |
| | THR(cells)| (cells) | (cells) | (cells) |
+----------------------------------------------------------+
| VSI_DEFAULT( 1)| 960 | 576 | 288 | 720 |
| VSI_SIGNAL( 2)| 300 | 250 | 250 | 300 |
| ATMF_CBR1(256)| 240 | 240 | 192 | 192 |
| ATMF_VBRrt1(257)| 480 | 480 | 384 | 384 |
CLR 1–15 Cell Loss Ratio for this COSB. The minimum
supported CLR is 10
-6
and maximum supported
CLR is 10
-10
Note This parameter is available on AXSM-E
and AXSM-XG cards only.
RSD 1–15 RSD for this COSB. The minimum supported
CLR is 10
-6
and maximum supported CLR is 10
-10
Note This parameter is available on the
AXSM-XG card only.
CELL DISC ALARM Enabled
Disabled
Enables/disables discard alarms on the COSB.
Note This parameter is available on the
AXSM-E card only.
Table 4-5 SCT COSB Parameter Descriptions (continued)
Label Range and Units Description