Specifications

4-16
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 4 AXSM Card Management
Managing Port SCTs
Port SCT COSB Parameters (cosb)
The dspportsct cosb command output varies slightly according to type of AXSM card you are working
on.
The following report appears when you enter the dspportsct cosb command on an AXSM/A or AXSM/B
card:
M8850_LA.1.AXSM.a > dspportsct cosb 11
+------------------------------------+
| MINOR - VERSION | MAJOR - VERSION |
| 000000000000001 | 000000000000001 |
+------------------------------------+
+--------------------------------------------------------+
| Service Class Template [05] : COSB Parameters
+--------------------------------------------------------+
| COSB | MIN-PRIORITY | EXCESS-PRIORITY | ERS ENABLE |
+--------------------------------------------------------+
| 00000001 | 002 | 002 | ENABLE |
| 00000002 | 002 | 002 | ENABLE |
| 00000003 | 000 | 000 | DISABLE |
| 00000004 | 001 | 001 | DISABLE |
| 00000005 | 002 | 001 | DISABLE |
| 00000006 | 004 | 007 | DISABLE |
| 00000007 | 002 | 008 | DISABLE |
| 00000008 | 002 | 006 | DISABLE |
| 00000009 | 002 | 005 | DISABLE |
| 00000010 | 002 | 004 | DISABLE |
| 00000011 | 002 | 002 | DISABLE |
| 00000012 | 002 | 002 | DISABLE |
| 00000013 | 002 | 002 | DISABLE |
| 00000014 | 002 | 002 | DISABLE |
GCRA-2 1 to 3 Generic Cell Rate Algorithm – Bucket 2. In ATM, an algorithm that
defines conformance with respect to the traffic contract of the connection.
For each cell arrival, the GCRA determines whether the cell conforms to
the traffic contract.
Note If UPC-Enable is set to disable, this object is not used.
Choose one of the following options to indicate how cells that fail the
second bucket of the policer should be handled:
1 - Discard
2 - Set CLP bit
3 - Set CLP of untagged cells, discard tagged cells.
CI-CNTRL 1 -
Enabled
2 -
Disabled
Congestion Indication Control. Indicates whether the EFCI Threshold has
been exceeded.
WFQ_ENB Enabled
Disabled
Note this parameter is available on AXSM-E and AXSM-XG cards only.
Table 4-4 SCT General Parameter Descriptions (continued)
Parameter Range Description