Specifications

4-3
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 4 AXSM Card Management
Managing Cards
Managing Cards
Basic card initialization and configuration are described in the Cisco MGX 8850 (PXM1E/PXM45),
Cisco MGX 8950, and Cisco MGX 8830 Configuration Guide, Release 5.1, and the Cisco MGX 8850
Edge Concentrator Installation and Configuration, Release 1.1.3 documentation.
The following sections provide procedures for doing the following:
• Displaying General Card Information
• Displaying Software Version and Status Information
This section provides procedures for some of the most common card management commands. For a
complete list of card management commands, refer to Chapter 5, “AXSM Command Reference.”
Displaying General Card Information
To display general information about an AXSM card, enter the dspcd command, as shown in the
following example:
M8850_LA.2.AXSM.a > dspcd
Front Card Upper Card Lower Card
---------- ---------- ------------
Card Type: AXSM-4-622 SMFIR-2-622 SMFIR-2-622
State: Active Present Present
Serial Number: SAK03500088 SBK0446006S SBK04460020
Boot FW Rev: 5.0(4.34)A --- ---
SW Rev: 5.0(4.34)A --- ---
800-level Rev: M6 A1 A1
Orderable Part#: 800-05774-05 800-05383-01 800-05383-01
PCA Part#: 73-4504-2 73-4125-1 73-4125-1
CLEI Code: 1234567890 BAI9ADTAAA BAI9ADTAAA
Reset Reason: Power ON Reset
Card Operating Mode: AXSM-A
SCT File Configured Version: 1
SCT File Operational Version: 1
Card SCT Id: 5
Type <CR> to continue, Q<CR> to stop:
#Lines #Ports #Partitions #SPVC #SPVP #SVC
------ ------ ----------- ------- ------- -------
2 2 4 0 0 7
Port Group[1]:
#Chans supported:32512 Lines:1.1
who See details about “who” a user is -468
whoami Display user details about currently logged in user -469
Table 4-1 Session Management Commands
Command Description Page