Specifications

3-65
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 3 Provisioning ATM Services
General AXSM Configuration Procedures
slave endpoint added successfully
slave endpoint id: 00000E1000001C008051B730FFFFFF010B180100.10.40
Note Set the -casttype option to 2, as if this connection is a P2P connection. You will be deleting this endpoint
at the end of the procedure
Step 4 Write down the NSAP address the switch displays when the addcon command is complete. You will
need this to add the party to the root of the P2MP connection.
Step 5 Enter the delcon command to delete the connection you added in Step 2.
Step 6 Enter the dspcon command to verify that the slave was deleted properly.
After you have the NSAP for a party, you can add that party to a root.