User`s guide

2-5
Cisco SDM Express 2.4 User’s Guide
OL-7141-05
Chapter 2 Cisco SDM Express Edit Mode
Wireless
LAN interface configuration Fields
You can edit the IP address and subnet mask of the LAN interface in these fields.
See IP Address Field if you need more information about the IP address and
subnet mask fields.
Wireless
The Wireless window appears when your router has a wireless interface. If you
need to configure advanced wireless parameters, click Launch Wireless
Application.
Refresh Button
This button is visible if you editing an initial configuration. Click
Cisco SDM Express Buttons for more information.
WAN—Unable to Configure WAN Interface
This window appears when Cisco SDM Express is unable to configure the
interface you have selected as a WAN interface. This might happen if the
interface you selected is not supported by Cisco SDM Express, or if the interface
has a partial configuration that was entered using the CLI.
You can select another interface to configure, or log on to the router and remove
the configuration statements under the interface that you want to configure. Select
Teln e t from the Tools section, log onto the router and enter config mode. Use the
CLI to remove the configuration statements. Then, return to Cisco SDM Express
and configure the WAN interface.
No WAN Available
This window appears when Cisco SDM Express cannot detect a WAN interface
on your router.