User guide

7
Release Notes for Cisco Router and Security Device Manager 2.5
OL-5009-20
System Requirements
• PA-8E
• PA-4E
Cisco SDM supports the following Network Processing Engines and Network Service Engines on Cisco
7000 family routers.
• NPE-225
• NPE-400
• NPE-G1
• NPE-G2
• NSE-1
Cisco SDM supports the following service adapters on Cisco 7000 family routers:
• SA-VAM
• SA-VAM2
• SA-VAM2+
• C7200-VSA
Cisco SDM also supports the MOD-1700VPN.
PC System Requirements
Cisco SDM is designed to run on a personal computer that has a Pentium III or faster processor.
Software Supported
This section describes Cisco SDM software requirements.
Cisco IOS Releases
Cisco SDM is compatible with the Cisco IOS releases listed in Table 2.
Note Cisco SDM supports the Cisco IOS Intrusion Prevention System (Cisco IOS IPS). In order to be able to
use Cisco SDM to configure the Cisco IOS IPS software, the router must run Release 12.3(8)T4 or a later
release. Later Cisco IOS releases support additional Cisco IOS IPS functionality. Table 3 lists the Cisco
IOS IPS feature history by Cisco IOS release.
Table 2 Cisco SDM-Supported Routers and Cisco IOS Releases
Cisco SDM-Supported Routers Cisco SDM-Supported Cisco IOS Releases
Cisco SB101
Cisco SB106
Cisco SB107
• 12.3(8)YG
• 12.4(2)T or later releases
Cisco 815
• 12.4(6)XE1 or later releases.
• 12.4(11)XJ2 or later releases.
• 12.4(11)T or later releases.