User guide

Release Notes for Cisco Router and Security Device Manager 2.5

OL-5009-20

Caveats

5. Click the Java tab. Locate the Java Runtime Settings dialog. Click the View button if necessary

to display the dialog, and proceed to 6.

6. In the Java Runtime Parameters column, remove the value -Xmx256m from the Java runtime

parameters column. If this statement is found in other rows, remove the statement from those

rows as well.

7. Click OK in the Java Runtime Settings dialog.

8. Click Apply in the Java Control Panel, and then click OK.

9. Restart Cisco SDM.

• CSCsl32119

When Cisco SDM is used to configure Cisco IOS IPS on a Cisco 7301 router, Cisco SDM may take

as much as 10 minutes to launch and correctly display Cisco IOS IPS signatures. If Cisco SDM

launches without delay, Cisco IOS IPS signatures are not displayed correctly, and errors can be seen

when the Edit Signatures window is displayed. When the Cisco SDM display is refreshed in these

circumstances it may take up to 10 minutes for the signatures to be displayed correctly,

This problem has been found on 7301 routers running Cisco IOS 12.4(11)T3, when Cisco SDM is

run under Internet Explorer 6.0 using Java Runtime Environment 1.6.0_03.

• CSCsk98378

Due to a Cisco IOS problem described in CSCsk67302, the output of the show running-config

command will not show SSL VPN gateways associated with SSL VPN contexts. This problem has

been found in Cisco IOS 12.4(15)T and 12.4(15)T1 images

• CSCsj21989

For a description of this caveat, see Cisco SDM Merge and Replace Configuration Functions Fail

Under Some Conditions.

• CSCsi34046

The java console displays an exception when a rule is created by going to Edit Firewall Policy >

Add a Rule, and creating a rule that specifies application inspection for any Instant Messaging (IM)

or Peer-to-Peer (P2P) protocol. This occurs when traffic is first specified, followed by the IM or P2P

service and then the application inspection parameters.

Workaround: Go to Edit Firewall Policy > Add a Rule, and create the IM or P2P rule but do not

specify traffic information. In the Edit Firewall Policy window, choose the rule you created, click

Edit, add the traffic information, and click OK.

• CSCsg61829

When Cisco SDM is invoked using Firefox 2.0 is closed and then Firefox is relaunched, a pop-up

saying that the browser was not closed properly appears and asks if the user wants to restore the

previous session or start a new session. Clicking Restore Session opens the previously established

SDM session without asking for any credentials.

Workaround: Instead of choosing to restore the old session, click Start new session to start a fresh

browser session.

• CSCsh11991

Because of a Cisco IOS IPS problem, when migrating a Cisco IOS IPS configuration created using

a Cisco IOS image older than version 12.4(11)T to a 12.4(11)T or later environment, user-modified

signatures are not migrated.

Workaround: After migrating, use the Add or Edit controls in the Edit IPS window to create the

signature in the new format.