Specifications

Implementing BGP on Cisco IOS XR Software
How to Implement BGP on Cisco IOS XR Software
RC-43
Cisco IOS XR Routing Configuration Guide
How to Implement BGP on Cisco IOS XR Software
This section contains instructions for the following tasks:
• Enabling BGP Routing, page RC-44 (required)
• Configuring a Routing Domain Confederation for BGP, page RC-47 (optional)
• Resetting eBGP Session Immediately Upon Link Failure, page RC-49 (optional)
• Logging Neighbor Changes, page RC-49 (optional)
• Adjusting BGP Timers, page RC-50 (optional)
• Changing the BGP Default Local Preference Value, page RC-51 (optional)
• Configuring the MED Metric for BGP, page RC-52 (optional)
• Configuring BGP Weights, page RC-54 (optional)
• Tuning the BGP Best-Path Calculation, page RC-55 (optional)
• Indicating BGP Back-door Routes, page RC-57 (optional)
• Configuring Aggregate Addresses, page RC-59 (optional)
• Redistributing iBGP Routes into IGP, page RC-60 (optional)
• Redistributing Prefixes into Multiprotocol BGP, page RC-62 (optional)
• Configuring BGP Route Dampening, page RC-64 (optional)
• Applying Policy When Updating the Routing Table, page RC-69 (optional)
• Setting BGP Administrative Distance, page RC-71 (optional)
• Configuring a BGP Neighbor Group and Neighbors, page RC-72 (required)
• Configuring a Route Reflector for BGP, page RC-75 (optional)
• Configuring BGP Route Filtering by Route Policy, page RC-77 (optional)
• Configuring BGP Next Hop Trigger Delay, page RC-79 (optional)
• Disabling Next-hop Processing on BGP Updates, page RC-81 (optional)
• Configuring BGP Community and Extended-Community Advertisements, page RC-82 (optional)
• Configuring the BGP Cost Community, page RC-84 (optional)
• Configuring Software to Store Updates from a Neighbor, page RC-89 (optional)
• Configuring Distributed BGP, page RC-91 (optional)
• Configuring a VPN Routing and Forwarding Instance in BGP, page RC-94 (optional)
• Configuring Keychains for BGP, page RC-112 (optional)
• Configuring an MDT Address Family Session in BGP, page RC-113 (optional)
• Disabling a BGP Neighbor, page RC-116 (optional)
• Resetting Neighbors Using BGP Dynamic Inbound Soft Reset, page RC-118 (optional)
• Resetting Neighbors Using BGP Outbound Soft Reset, page RC-118 (optional)
• Resetting Neighbors Using BGP Hard Reset, page RC-119 (optional)
• Clearing Caches, Tables, and Databases, page RC-120 (optional)
• Displaying System and Network Statistics, page RC-121 (optional)