Specifications

Implementing Routing Policy on Cisco IOS XR Software
Information About Implementing Routing Policy on Cisco IOS XR Software
RC-389
Cisco IOS XR Routing Configuration Guide
Interface-Inbound
The interface-inbound attach point allows you to filter or update inbound RIP routes that match a route
policy for a specific interface.
The following example shows how to filter inbound RIP routes that match the route policy for interface
0/1/0/1:
router rip
interface GigabitEthernet0/1/0/1
route-policy rip-in in
Interface-Outbound
The interface-outbound attach point allows you to filter or update outbound RIP routes that match a route
policy for a specific interface.
The following example shows how to filter outbound RIP routes that match the route policy for interface
0/2/0/1:
router rip
interface GigabitEthernet0/2/0/1
route-policy rip-out out
RIP Attributes and Operators
Table 11 summarizes the RIP attributes and operators.
Table 11 RIP Attributes and Operators
Attach Point Attribute Match Set
default-information
originate
next-hop
rip-metric
rip-tag
n/a set
rib-has-route in n/a
global-inbound destination
next-hop
in n/a
protocol is, in n/a
rip-metric n/a add
global-outbound destination in n/a
rip-metric n/a add
interface-inbound destination
next-hop
in n/a
protocol is, in n/a
rip-metric n/a add
interface-outbound destination in n/a
rip-metric n/a add