Specifications

Implementing OSPF on Cisco IOS XR Software
How to Implement OSPF on Cisco IOS XR Software
RC-274
Cisco IOS XR Routing Configuration Guide
Examples
This section provides the following output examples:
• Sample Output for the show ospf Command Before Configuring MPLS TE, page RC-274
• Sample Output for the show ospf mpls traffic-eng Command, page RC-274
• Sample Output for the show ospf Command After Configuring MPLS TE, page RC-275
Sample Output for the show ospf Command Before Configuring MPLS TE
In the following example, the show route ospf EXEC command verifies that POS interface 0/3/0/0 exists
and MPLS TE is not configured:
RP/0/RP0/CPU0:router# show route ospf 1
O 11.0.0.0/24 [110/15] via 0.0.0.0, 3d19h, tunnel-te1
O 192.168.0.12/32 [110/11] via 11.1.0.2, 3d19h, POS0/3/0/0
O 192.168.0.13/32 [110/6] via 0.0.0.0, 3d19h, tunnel-te1
RP/0/RP0/CPU0:router#
Sample Output for the show ospf mpls traffic-eng Command
In the following example, the show ospf mpls traffic-eng EXEC command verifies that the MPLS TE
fragments are configured correctly:
RP/0/RP0/CPU0:router# show ospf 1 mpls traffic-eng fragment
OSPF Router with ID (192.168.4.3) (Process ID 1)
Area 0 has 1 MPLS TE fragment. Area instance is 3.
MPLS router address is 192.168.4.2
Next fragment ID is 1
Fragment 0 has 1 link. Fragment instance is 3.
Fragment has 0 link the same as last update.
Fragment advertise MPLS router address
Link is associated with fragment 0. Link instance is 3
Link connected to Point-to-Point network
Link ID :55.55.55.55
Interface Address :192.168.50.21
Neighbor Address :192.168.4.1
Admin Metric :0
Maximum bandwidth :19440000
Maximum global pool reservable bandwidth :25000000
Maximum sub pool reservable bandwidth :3125000
Number of Priority :8
Global pool unreserved BW
Priority 0 : 25000000 Priority 1 : 25000000
Priority 2 : 25000000 Priority 3 : 25000000
Priority 4 : 25000000 Priority 5 : 25000000
Priority 6 : 25000000 Priority 7 : 25000000
Sub pool unreserved BW
Priority 0 : 3125000 Priority 1 : 3125000
Priority 2 : 3125000 Priority 3 : 3125000
Priority 4 : 3125000 Priority 5 : 3125000
Priority 6 : 3125000 Priority 7 : 3125000
Affinity Bit :0
In the following example, the show ospf mpls traffic-eng EXEC command verifies that the MPLS TE
links on area instance 3 are configured correctly:
RP/0/RP0/CPU0:router# show ospf mpls traffic-eng link