Specifications

Implementing BGP on Cisco IOS XR Software
How to Implement BGP on Cisco IOS XR Software
RC-111
Cisco IOS XR Routing Configuration Guide
Step 5
redistribute connected [metric metric-value ]
[route-policy
route-policy-name ]
or
redistribute eigrp process-id [match {external
| internal}] [metric
metric-value ]
[route-policy
route-policy-name ]
or
redistribute isis process-id [level {1 |
1-inter-area | 2}] [metric
metric-value ]
[route-policy
route-policy-name ]
or
redistribute ospf process-id [match {external
[1 | 2] | internal | nssa-external [1 | 2]}]
[metric
metric-value ] [route-policy
route-policy-name ]
or
redistribute ospfv3 process-id [match {external
[1 | 2] | internal | nssa-external [1 | 2]}]
[metric
metric-value ] [route-policy
route-policy-name ]
or
redistribute rip [metric metric-value ]
[route-policy
route-policy-name ]
or
redistribute static [metric metric-value ]
[route-policy
route-policy-name ]
Example:
RP/0/RP0/CPU0:router(config-bgp-vrf-af)#
redistribute eigrp 23
Configures redistribution of a protocol into the VRF address
family context.
The redistribute command is used if BGP is not used
between the PE-CE routers. If BGP is used between PE-CE
routers, the IGP that is used has to be redistributed into BGP
to establish VPN connectivity with other PE sites.
Redistribution is also required for inter-table import and
export.
Step 6
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-bgp-vrf-af)# end
or
RP/0/RP0/CPU0:router(config-bgp-vrf-af)# commit
Saves configuration changes.
• When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
– Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
– Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
– Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
Command or Action Purpose