Specifications

Implementing BGP on Cisco IOS XR Software
How to Implement BGP on Cisco IOS XR Software
RC-88
Cisco IOS XR Routing Configuration Guide
address-family {ipv4 unicast | ipv4 multicast |
ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast}
redistribute ospfv3
process-id [match {external
[1 | 2] | internal | nssa-external [1 | 2]}]
[metric
metric-value ] [route-policy
route-policy-name ]
or
address-family {ipv4 unicast | ipv4 multicast |
ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast}
redistribute rip [metric
metric-value ]
[route-policy
route-policy-name ]
or
address-family {ipv4 unicast | ipv4 multicast |
ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast}
redistribute static [metric
metric-value ]
[route-policy
route-policy-name ]
or
address-family {ipv4 unicast | ipv4 multicast |
ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast}
network {
ip-address/prefix-length | ip-address
mask
} [route-policy route-policy-name ]
or
neighbor ip-address
remote-as
as-number
address-family {ipv4 unicast | ipv4 multicast |
ipv4 labeled-unicast | ipv4 tunnel | ipv4 mdt |
ipv6 unicast | ipv6 multicast | ipv6
labeled-unicast | vpnv4 unicast | vpnv6
unicast}
route-policy
route-policy-name {in | out}
or
Example:
RP/0/RP0/CPU0:router(config-bgp)#
default-information originate
Command or Action Purpose