Specifications

Implementing BGP on Cisco IOS XR Software
How to Implement BGP on Cisco IOS XR Software
RC-87
Cisco IOS XR Routing Configuration Guide
Step 5
router bgp as-number
Example:
RP/0/RP0/CPU0:router(config)# router bgp 120
Enters BGP configuration mode allowing you to configure
the BGP routing process.
Step 6
default-information originate
or
aggregate-address address/mask-length [as-set]
[as-confed-set] [summary-only] [route-policy
route-policy-name ]
or
address-family {ipv4 unicast | ipv4 multicast |
ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast}
redistribute connected [metric
metric-value ]
[route-policy
route-policy-name ]
or
address-family {ipv4 unicast | ipv4 multicast |
ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast}
redistribute eigrp
process-id [match {external
| internal}] [metric
metric-value ]
[route-policy
route-policy-name ]
or
address-family {ipv4 unicast | ipv4 multicast |
ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast}
redistribute isis
process-id [level {1 |
1-inter-area | 2}] [metric
metric-value ]
[route-policy
route-policy-name ]
or
address-family {ipv4 unicast | ipv4 multicast |
ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast}
redistribute ospf
process-id [match {external
[1 | 2] | internal | nssa-external [1 | 2]}]
[metric
metric-value ] [route-policy
route-policy-name ]
or
Applies the cost community to the attach point (route
policy).
Command or Action Purpose