Installation guide

1-27
Cisco Interface Cards Installation Guide
OL-1919-12
Chapter 1 Overview of Cisco Interface Cards
Cisco 2600 Series Routers
2-Port FXO Voice/Fax (VIC-2FXO-M2)
3
12.0(7)XK
12.1(5)YB
12.1(2)T 12.2(1)
2-Port E&M Voice/Fax(VIC-2FXO-M3)
3
12.0(5)XK
12.0(7)XK
12.1(5)YB
11.3(6)T to
11.3(11)T
12.0(2)T
12.0(2)
4-Port FXO Voice/Fax(VIC2-4FXO)
4
Note Supported only by
Cisco 2600XM series routers.
12.2(15)ZJ 12.3(4)T –
2-Port ISDN BRI voice interface
(VIC-2BRI-S/T-TE)
3
12.0(2)XD
12.0(5)XK
12.0(7)XK
12.1(5)YB
12.0(3)T 12.1(1)
2Port ISDN BRI Voice
(VIC2-2BRI-NT/TE)
4
Note Supported only by
Cisco 2600XM series routers.
12.2(15)ZJ 12.3(4)T –
2-Port CAMA Voice (VIC-2CAMA)
3
– 12.2(11)T 12.3(1)
1-Port T1 Multiflex Trunk
(VWIC-1MFT-T1)
12.0(5)XK
12.0(7)XK
12.1(5)YB
12.0(7)T 12.1(1)
2-Port T1 Multiflex Trunk
(VWIC-2MFT-T1)
12.0(5)XK
12.0(7)XK
12.1(5)YB
12.0(7)T 12.1(1)
2-Port T1 Multiflex Trunk with
Drop-and-insert (VWIC-2MFT-T1-DI)
12.0(5)XK
12.0(7)XK
12.1(5)YB
12.0(7)T 12.1(1)
2-Port E1 Multiflex Trunk with
Drop-and-insert (VWIC-2MFT-E1-DI)
12.0(5)XK
12.0(7)XK
12.1(5)YB
12.0(7)T 12.1(1)
Table 1-4 Cisco IOS Releases Required for WICs and VICs in Cisco 2600 Series Routers (continued)
Interface Card
Cisco IOS Limited
Lifetime Releases
First Cisco IOS
T-Train Release
First Cisco IOS
Mainline Release