Datasheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 24
STEP 6: Select option cards.
Select option cards from the following list. You can select a maximum of 10 PCIe cards.
●
Cisco UCS P81E Virtual Interface Card/Dual port 10Gbps N2XX-ACPCI01
(Max. 2 Supported in slots 1 & 2)
●
Broadcom NetXtreme II 5709 Quad Port Ethernet PCIe Adapter Card with N2XX-ABPCI03
TCP Offload Engine (TOE) and iSCSI HBA
●
Broadcom NetXtreme II 57711 Dual Port 10 GbE PCIe Adapter Card with N2XX-ABPCI02
TCP Offload Engine (TOE) and iSCSI HBA
●
Emulex LightPulse LPe11002 4-Gbps Fibre Channel PCIe Dual Channel HBA N2XX-AEPCI03
●
Emulex Converged Network Adapter / Dual port 10Gb N2XX-AEPCI01
●
Emulex 8Gb HBA (Light Pulse LP-e12002) N2XX-AEPCI05
●
Intel 10GbE Dual port Niantec Controller with Copper SFP+ Cable N2XX-AIPCI01
●
Intel Quad port GbE HBA N2XX-AIPCI02
●
Mellanox Connect X-2 EN with dual 10GbE SFP+ ports N2XX-AMPCI01
●
QLogic QLE8152 Dual Port 10-Gbps PCIe Converged Network Adapter (CNA) N2XX-AQPCI01
●
QLogic SANblade QLE2462 Dual Port 4-Gbps FC-to-PCI Express HBA N2XX-AQPCI03
●
QLogic QLE2562 8Gb Dual Port Fibre Channel HBA N2XX-AQPCI05
STEP 7: Select redundant power supply units.
In two-processor configuration, two power supplies come standard with the base chassis, and you can order up to
two “redundant” power supplies. In a four-processor configuration, four power supplies come standard with the
base chassis, and no extra power supplies are needed.
●
850W Power Supply Unit for C-Series C460 RC460-PSU2-850W
Contents: Overview Detailed Views Base Unit Features Configuring Memory HDD
Option Cards RAID Software Services Memory Notes
PCIe Slot Notes RAID Controller Notes Physical Specs Power Specs Environmental Specs