Datasheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 24
STEP 5: Select a factory-configured RAID setup.
Most customers prefer to configure their own RAID setup.
If you would prefer that Cisco to configure the RAID, choose one of the following options:
●
RAID 0 (Striping) R2XX-RAID0
Requires a minimum of one hard drive.
●
RAID 1 (Mirroring) R2XX-RAID1
Requires exactly two hard drives with same size, speed and capacity.
●
RAID 5 R2XX-RAID5
Requires a minimum of three HDDs, all with identical speed and capacity.
●
RAID 6 R2XX-RAID6
Requires a minimum of four HDDs, all with identical speed and capacity.
●
RAID 10 R2XX-RAID10
Requires a minimum of four HDDs, all with identical speed and capacity.
Contents: Overview Detailed Views Base Unit Features Configuring Memory HDD
Option Cards RAID Software Services Memory Notes
PCIe Slot Notes RAID Controller Notes Physical Specs Power Specs Environmental Specs