Datasheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 24
STEP 2: Select the memory type.
Select a minimum of one and a maximum of 32 DIMM kits from the following list:
●
8 GB DDR3-1333-MHz RDIMM/PC3-10600/2 x 4GB Kit/ Low-Dual Volt A02-M308GB3-2
●
16 GB DDR3-1333-MHz RDIMM/PC3-10600/2 x 8GB Kit / Low-Dual Volt A02-M316GB3-2
●
32GB DDR3-1066MHz RDIMM/PC3-8500/2 x 16GB 4R Kit / Low-Dual Volt A02-M332GB3-2-L
●
8GB DDR3-1333MHz RDIMM/PC3-10600/2 x 4GB 2R Kit A02-M308GD5-2
●
16GB DDR3-1333MHz RDIMM/PC3-10600/2 x 8GB 2R Kit A02-M316GD5-2
●
Factory Memory Mirroring Option N01-MMIRROR
Note: Memory mirroring is available only when banks 1 and 2 are populated with identical DIMMs.
STEP 3: Select the RAID controller option.
If your system includes SAS or SATA drives, you must choose a RAID controller.
●
LSI Controller 9240-8i RC460-PL002
◦ Installs in dedicated SAS riser PCIe slot on a C460 M2
◦ Supports up to 12 SAS or SATA drives
◦ Supports RAID 0, 1, 5, 10, 50
◦ No battery backup option available
●
LSI Controller 9260-8i RC460-PL001
◦ Installs in dedicated SAS riser PCIe slot on a C460 M2
◦ Supports up to 12 SAS or SATA drives
◦ Supports RAID 0,1,5,6,10, 50 or 60
◦ Includes 512 MB of write cache
◦ Battery backup option available
Contents: Overview Detailed Views Base Unit Features Configuring Memory HDD
Option Cards RAID Software Services Memory Notes
PCIe Slot Notes RAID Controller Notes Physical Specs Power Specs Environmental Specs