Datasheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 29 of 33
The LSI SAS1068E Controller-Based Mezzanine card can be installed in the Mezzanine Slot on a UCS C200
server. The 1068E Mezzanine Card supports up to 8 SAS/SATA drives.
The LSI Mezzanine card (LSI
®
1068E Integrated Controller) supports the following features:
●
Supports 8 PCI Express lanes at a transfer rate up to 2.5Gb/s per lane, full duplex
●
Automatically negotiates PCI Express link widths
◦ Supports x8, x4, x1 link widths
●
PCI Express Hot Plug
●
Power management support
●
PCI Express software is compatible with PCI and PCI-X software
●
8-port SAS/SATA Controller
◦ Supports 2, 3, or 4-phy wide SAS port configurations
●
Supports 1.5 and 3Gb/s SAS and SATA data transfer rates per port, full duplex
●
Port independent auto-negotiation
●
Compatible with SATA target devices
●
Supports SSP, SMP, STP and SATA protocols
●
Supports SGPIO (SFF-8485)
●
Flash and local memory support
●
Integrated RAID support
Refer to LSI
®
1068E Controller-Based Mezzanine Card Product Specification or visit the link below for a detailed
description of this board:
http://www.lsi.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068e/index.html.
Contents: Overview Detailed Views Base Unit Features Configuring Memory HDD
Option Cards RAID Software Services Memory Notes
Option Card Notes RAID Controller Notes Physical Specs Power Specs Environmental Specs