Datasheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 24 of 33
Product Notes
Memory Notes
Figure 8. Memory notes, allowable configurations, and rules/guidelines.
●
When adding DIMMs to a channel, fill Bank 1 first (the blue slots). You can run 1 or 2 DIMMs per channel.
●
DIMMs within a server should all be the same type, speed, and size. Mixing different DIMMs causes the
server to set the memory speed to that of the slowest installed DIMMs.
●
CPU 1 supports memory mirroring only when Channels A and B are populated with identical DIMMs. In this
case, do not populate Channel C or memory mirroring will be automatically disabled.
●
CPU 2 supports memory mirroring only when Channels D and E populated with identical DIMMs. In this
case, do not populate Channel F or memory mirroring will be automatically disabled.
●
If memory mirroring is used, the DRAM size is reduced by 50%. Memory sparing is not supported.
For the list of currently supported DIMMs, see http://www.cisco.com/en/US/prod/ps10265/ps10493/c-
series_part_numbers.html.
Contents: Overview Detailed Views Base Unit Features Configuring Memory HDD
Option Cards RAID Software Services Memory Notes
Option Card Notes RAID Controller Notes Physical Specs Power Specs Environmental Specs