System information

Introduction

Using the Getting Started Page

Cisco RV215W Wireless-N VPN Firewall Administration Guide 9

Configuration Next Steps

Although the Setup Wizard automatically configures the Cisco RV215W, we

suggest customizing some settings to provide better security and performance:

• If you already have a DHCP server on your network and you do not want the

Cisco RV215W to act as a network DHCP server, disable the server. See

Configuring the LAN Settings.

• Configure your Virtual Private Network (VPN) by using QuickVPN. QuickVPN

is included on the CD that shipped with your firewall. See Appendix A,

“Using Cisco QuickVPN.”

• The Cisco RV215W supports up to four wireless networks. You can only set

up one wireless network (or SSID) by using the Setup Wizard. To configure

additional wireless networks, use the web-based Device Manager. See

Configuring the Wireless Network.

Using the Getting Started Page

The Getting Started page displays the most common Cisco RV215W

configuration tasks. Use the links on this page to jump to the relevant configuration

page.

This page appears every time you start the Device Manager. To change this

behavior, check Don’t show on start up.

Initial Settings

Change Default

Administrator Password

Displays the Users page where you can change

the administrator password and set up a guest

account. See Configuring User Accounts.

Launch Setup Wizard Launches the Setup Wizard. Follow the on-screen

instructions.