System information

1
Cisco RV215W Wireless-N VPN Firewall Administration Guide 7
Introduction
This chapter provides information toguide you through the installation process,
and get started using the browser-based Device Manager.
• Verifying the Hardware Installation
• Using the Setup Wizard
• Using the Getting Started Page
• Connecting to Your Wireless Network
Verifying the Hardware Installation
Configure the device to connect to your wired and wireless networks by using the
Cisco RV215W Wireless-N VPN Firewall Quick Start Guide.
!
CAUTION Use the 12V, 1.67a power supply provided with the device. Using a different power
supply could cause poor performance or damage the device.
To verify the hardware installation and connection to the Internet, complete the
following tasks:
Check the LED states (described in Cisco RV215W Wireless-N VPN Firewall
Quick Start Guide provided with the device).
Connect a computer to an available LAN port and verify that you can connect to a
website on the Internet, such as www.cisco.com.
Using a PC with a wireless feature, connect to a website on the Internet, such as
www.cisco.com. To configure your radio see Connecting to Your Wireless
Network.