System information

Configuring Networking

Configuring IPv6

Cisco RV215W Wireless-N VPN Firewall Administration Guide 59

STEP 4 For 6RD Tunneling, choose auto or manual.

STEP 5 Enter the following information:

• IPv6 Prefix

• IPv6 Prefix Length

• Border Relay

• IPv4 Mask Length.

STEP 6 Click Save.

4 to 6 Tunneling

To configure 4-to-6 tunneling:

STEP 1 Select Networking > IPv6 > Tunneling.

STEP 2 In the 4 to 6 Tunneling field, check Enable.

STEP 3 Enter the local WAN IPv6 address on the Cisco RV215W.

STEP 4 Enter the Remote IPv6 address, or the IP address of the remote endpoint.

STEP 5 Click Save.

Viewing IPv6 Tunnel Status

To view IPv6 tunnel status:

STEP 1 Choose Networking > IPv6 > IPv6 Tunnels Status.

STEP 2 Click Refresh to display the most up-to-date information.

This page displays information about the automatic tunnel set up through the

dedicated WAN interface. The table shows the name of tunnel and the IPv6

address that is created on the device.