System information

Configuring Networking
Configuring the LAN Settings
Cisco RV215W Wireless-N VPN Firewall Administration Guide 39
2
STEP 3 Enter this information:
STEP 4 Click Save.
To edit the settings of a VLAN, select the VLAN and click Edit. To delete a selected
VLAN, click Delete. Click Save to apply changes.
VLAN ID Numerical VLAN ID to assign to endpoints in the VLAN
membership. The number you enter must be between
3 to 4094. VLAN ID 1 is reserved for the default VLAN,
and is used for untagged frames received on the
interface.
Description A description that identifies the VLAN.
Inter VLAN Routing
Allows an end station in one VLAN to communicate with
an end station in another VLAN.
Port 1
Port 2
Port 3
Port 4
You can associate VLANS on the Cisco RV215W to the
LAN ports on the device. By default, all LAN ports
belong to VLAN1. You can edit these ports to associate
them with other VLANS. Choose the outgoing frame
type for each port:
Untagged—The interface is an untagged member of
the VLAN. Frames of the VLAN are sent untagged to
the port VLAN.
Tagged—The port is a tagged member of the VLAN.
Frames of the VLAN are sent tagged to the port VLAN.
Excluded—The port is currently not a member of the
VLAN. This is the default for all the ports when the
VLAN is first created.