System information

Configuring Networking

Configuring the LAN Settings

Cisco RV215W Wireless-N VPN Firewall Administration Guide 36

Changing the Device Management IP Address

The local device management IP address of the Cisco RV215W is static and

defaults to 192.168.1.1.

To change the local device management IP address:

STEP 1 Choose Networking > LAN > LAN Configuration.

STEP 2 In the IPv4 section, enter this information:

STEP 3 Click Save.

After changing the Cisco RV215W IP address, your PC is no longer able to display

the

Device Manager.

To display the

Device Manager, do one of the following:

• If DHCP is configured on the Cisco RV215W, release and renew your PC IP

address.

• Manually assign an IP address to your PC. The address must be on the same

subnetwork as the Cisco RV215W. For example, if you change the

Cisco RV215W IP address to 10.0.0.1, assign your PC an IP address in the

range of 10.0.0.2 to 10.0.0.255.

Open a new browser window and enter the new IP address of the Cisco RV215W

to reconnect.

VLAN The VLAN number.

Local IP Address Local LAN IP address of the Cisco RV215W. Make

sure this IP address is not in use by another device.

Subnet mask Subnet mask for the local IP address. The default

subnet mask is 255.255.255.0.