System information

Viewing the Cisco RV215W Status
Viewing the System Summary
Cisco RV215W Wireless-N VPN Firewall Administration Guide 15
2
Click Refresh to obtain the latest information.
The System Summary page displays this information:
System Information
• Firmware Version—Current software version the device is running.
• Firmware MD5 Checksum—The message-digest algorithm used to verify
the integrity of files.
• Locale—The language installed on the router.
• Language Version—The version of the installed language pack. The
language pack version should be compatible with the currently- installed
firmware. In some cases, an older language pack may be used with a newer
firmware image. The router will check the language pack version to see if it
is compatible with the current firmware version.
• Language MD5 Checksum—The MD5 checksum of the language pack.
• CPU Model—Chipset of CPU currently used.
• Serial Number—Serial number of the device.
• System Up Time—How long the system has been running.
• Current Time—Time of day.
• PID VID—Product ID and version ID of the device.
IPv4 Configuration
• LAN IP—LAN IP address of the device.
• WAN IP—WAN IP address of the device. You can release the current IP
address and obtain a new one by clicking Release or Renew.
• Gateway—IP address of the gateway to which the Cisco RV215W is
connected (for example, the cable modem).
• Mode—Displays Gateway if NAT is enabled, or Router.
• DNS 1—Primary DNS server IP address of the WAN port.
• DNS 2—Secondary DNS server IP address of the WAN port.
• DDNS—Indicates whether the Dynamic DNS is enabled or disabled.