System information

Configuring Quality of Service (QoS)

Configuring QoS Port-Based Settings

Cisco RV215W Wireless-N VPN Firewall Administration Guide 117

Configuring QoS Port-Based Settings

You can configure QoS settings for every LAN port on the Cisco RV215W. The

Cisco RV215W supports 4 priority queues that allow for traffic prioritization per

physical switch port.

To configure QoS settings for the Cisco RV215W LAN ports:

STEP 1 Choose QoS > QoS Port-Based Settings.

STEP 2 For each port in the Ethernet QoS Port-Based Settings table, enter this

information:

Trust Mode Choose one of the following options from the drop-

down menu:

• Port—This setting enables the port based

on QoS. You can then set the traffic priority

for a particular port. The traffic queue

priority starts at the lowest priority of 1 and

ends with the highest priority of 4.

• DSCP—Differentiated Services Code Point

(DSCP). Enabling this feature prioritizes the

network traffic across the LAN based on the

DSCP queue mapping on the DSCP

Settings page.

• CoS—Class of Service (CoS).

Default Traffic

Forwarding Queue for

Untrusted Devices

Choose a priority level for outbound traffic (1 to 4).