User guide

4-25
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 4 Building the Network
How Do I Synchronize the Network?
Step 6 The Distribution Method is manual. This specifies that the network clock source is statically
configured in the device.
Step 7 Enter the maximum network diameter, measured in hops, in the Max Diameter field.
The range is from 3-20. The default value is 20.
Note Change Time—The time when the global clocking was configured.
Clock Source—The clock source from the list of available clocking source
Step 8 Click Apply to apply the global clocking configuration settings.
Figure 4-3 Configuration Center—Clocking Tab
4.7.1.2 Displaying the List of Available Clock Sources
To display the available clock sources:
Step 1 In the Domain Explorer, right-click the PNNI node from the Hierarchy pane and choose Configuration
Center.
Step 2 Click the Elements tab to display the Configuration Window for Elements.