User guide

E-92
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix E Real-Time Counters
Common/Card-RudpSession—Supported Real-Time Counters
E.35 Common/Card-RudpSession—Supported Real-Time
Counters
This section includes the following information:
• RUDP Session Counters
All Versions catmtCidNx64Invalid
FCSFrames
catmtCidNx64InvalidFCSFrame
s
This object contains the number of invalid frames
received with invalid Frame Check Sequence
(FCS) error. This object is only applicable when
catmtCidNx64Mode is set to to 'hdlc'.
All Versions catmtCidNx64AbortS
eqFrames
catmtCidNx64AbortSeqFrames This object contains the number of invalid frames
received with invalid frame abort sequence error.
This object is only applicable when
catmtCidNx64Mode is set to to 'hdlc'.
All Versions catmtCidNx64Invalid
ShortFrames
catmtCidNx64InvalidShortFram
es
This object contains the number of invalid short
frames (length less than minimum length)
received. This object is only applicable when
catmtCidNx64Mode is set to to 'hdlc'.
All Versions catmtCidNx64Invalid
LongFrames
catmtCidNx64InvalidLongFrame
s
This object contains the number of invalid long
frames (length greater than maximum length)
received. This object is only applicable when
catmtCidNx64Mode is set to to 'hdlc'.
All Versions catmtCidNx64NoByt
eAlignErrorFrames
catmtCidNx64NoByteAlignError
Frames
This object contains the number of invalid frames
received with no byte alignment. This object is
only applicable when catmtCidNx64Mode is set
to to 'hdlc'.
All Versions catmtCidNx64RASTi
meOutFrames
catmtCidNx64RASTimeOutFra
mes
This object contains the number of frames
received with RAS timer timeout. This object is
only applicable when catmtCidNx64Mode is set
to to 'hdlc'.
Table E-79 CID Counters—platform EQ NOTARES (continued)
Applicability Counter Name MIB Object Name Description
Table E-80 RUDP Session Counters
Applicability Counter Name MIB Object Name Description
All Versions Number Of Initiated
Auto Resets
vismRudpSessionAutoResets Auto reset is also known as soft reset. VISM
(gateway) initiates an auto reset when it detects
that a connection has failed. This keeps track of
the number of auto resets initiated by VISM.
All Versions Number Of Received
Auto Resets
vismRudpSessionRcvdAutoRese
ts
This is the counter for the number of auto resets
initiated by MGC and received by VISM.
All Versions Number Of Packets
Received In Sequence
vismRudpSessionRcvdInSeqs This object indicates number of packets received
in sequence.