User guide

E-91
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix E Real-Time Counters
Common/Card-VxsmCid—Supported Real-Time Counters
All Versions External AIS Count catmtCidExtAISCnts This object contains the number of external AIS
AAL2 Type3 packets received. External AIS :
alarm indication signal associated with a
maintenance alarm detected on a defective
maintenance span, that is transmitted in the
direction of the defect as a substitute for normal
signal. The purpose is to show the downstream
entities that a defect has been identified and to
prevent other maintenance alarms consequent to
this first defect.
All Versions External RAI Count catmtCidExtRAICnts This object contains the number of external RAI
AAL2 Type3 packets received. External RAI is
transmitted upstream from an entity that has
detected defects persisting long enough to
constitute a received signal failure. External RAI
is to report in the backward direction to indicate
there is an interruption of service in the forward
direction.
All Versions catmtCidConnAISCn
ts
catmtCidConnAISCnts This object contains the number of external
connection AIS AAL2 packets received. External
Conn AIS is a Alarm Indicating Signal
transmitted in the downstream direction from the
AAL2 connecting point that first detects the
defect affecting the AAL2 connection including
defects indicated by the lower layers.
All Versions External Connection
RDI Count
catmtCidConnRDICnts This object contains the number of external
connection RDI AAL2 packets received. External
Connection RDI - is a signal transmitted in the
upstream direction by an AAL2 endpoint that is in
alarm state, as the result of having received an
AAL2 connection AIS or having detected a defect
that affects the AAL2 connection.
All Versions Nx64 Frames Xmt To
TDM
catmtCidNx64FramesTxToTDM This object contains the number of frames
transmitted to the TDM interface. This object is
only applicable when catmtCidNx64Mode is set
to to 'hdlc'.
All Versions Nx64 Frames Rcv
From TDM
catmtCidNx64FramesRxFromT
DM
This object contains the number of frames
received from the TDM interface. This object is
only applicable when catmtCidNx64Mode is set
to to 'hdlc'.
All Versions Nx64 Encoded Bytes
Xmt To TDM
catmtCidNx64EncBytesTxToTD
M
This object contains the number of encoded bytes
transmitted to the TDM interface.
All Versions Nx64 Encoded Bytes
Rcv From TDM
catmtCidNx64EncBytesRxFrom
TDM
This object contains the number of encoded bytes
received from the TDM interface.
Table E-79 CID Counters—platform EQ NOTARES (continued)
Applicability Counter Name MIB Object Name Description